The OEM tyre size for your Honda CB Hornet 160R is 100/80-17 front and 140/70-17 rear - both factory-fitted as tubeless tyres on 17-inch alloy rims. These sizes are designed for the Hornet's sporty handling characteristics and everyday city-to-highway versatility.
Whether you're replacing worn rubber or upgrading for better grip, choosing the correct size ensures optimal braking performance and cornering stability.
Compare compatible Eurogrip tyres below to find the right match for your riding style and check current Honda CB Hornet 160R tyre prices.
| Variant | Front Tyre Size | Rear Tyre Size | Load Index / Speed Rating |
|---|---|---|---|
| Honda CB Hornet 160R | 100/80-17 | 140/70-17 | Front: 52P, Rear: 66S |
| Tyre Type | Suitable For | Benefits |
|---|---|---|
| Tubeless (TL) | All Honda CB Hornet 160R variants with alloy rims | Factory-fitted on all current variants; allows safe gradual deflation, easier puncture repairs, and reduced risk of sudden blowouts. |
| Warranty Type | Duration |
|---|---|
| Manufacturing Defects | 7 years from the date of manufacture* |
| Non-Manufacturing Defects | 3 years from the date of manufacture* |
*Subject to applicable tread wear conditions and warranty terms.
The factory-fitted tyre size for the Honda CB Hornet 160R is 100/80-17 for the front and 140/70-17 for the rear. Both positions use tubeless tyres mounted on 17-inch alloy rims. This sizing provides balanced handling for city traffic and highway runs.
The recommended tyre pressure for the Honda CB Hornet 160R is 25 PSI for the front tyre and 29 PSI for the rear tyre. This applies to both solo riding and riding with a pillion. Always check pressure when tyres are cold for accurate readings.
No, using a 130/70-17 rear tyre instead of the OEM 140/70-17 is not recommended. The narrower profile alters the bike's handling geometry, reduces rear grip, and affects braking stability. Always stick to the manufacturer's specified tyre size for safe performance.
Replace your Honda CB Hornet 160R tyres when the tread depth falls below 1.5 mm on the front or 2.0 mm on the rear, or after covering 25,000 to 50,000 km, depending on riding conditions and tyre quality. Replace immediately if you notice cracks, bulges, or uneven wear.
Honda CB Hornet 160R tyre prices typically range from Rs. 2,000 to Rs. 5,300 per tyre, depending on brand, compound, and tread pattern. Prices vary between front and rear tyres due to size differences, with the wider 140/70-17 rear tyre generally costing more than the 100/80-17 front.
Yes, all Honda CB Hornet 160R variants come factory-fitted with tubeless tyres on alloy rims. Tubeless tyres allow for gradual air loss in case of punctures, reducing the risk of sudden blowouts. They also enable quicker roadside repairs using puncture plugs without removing the wheel.
No, the Honda CB Hornet 160R's five-spoke split alloy rims are designed exclusively for tubeless tyres. Installing tube-type tyres on alloy rims is unsafe and impractical, as alloy rims lack the spoke holes that tube-type setups require and do not provide proper air sealing for tubes.
The front tyre measures 100/80-17, meaning 100 mm width, 80% aspect ratio, and 17-inch diameter. The rear is 140/70-17 - 140 mm width, 70% aspect ratio, same diameter. The wider rear provides better traction under acceleration, while the narrower front aids in agile steering response.
Tyre lifespan on the Honda CB Hornet 160R depends on riding style, road conditions, tyre pressure maintenance, and load. Aggressive acceleration, hard braking, and potholes accelerate wear. Regular pressure checks, smooth throttle use, and avoiding overloading can extend tread life significantly beyond the 25,000 km baseline.
Eurogrip manufactures tyres for a wide range of two-wheelers, including motorcycles in the 160cc segment. To verify specific Eurogrip models compatible with the 100/80-17 front and 140/70-17 rear sizes, check the product grid above or contact Eurogrip's customer support for current availability and fitment confirmation.