The Benelli TNT 600i uses 110/70-17 (front) and 150/60-17 (rear) radial tubeless tyres - both OEM specifications for this inline-four sportbike. These W-rated tyres handle the TNT 600i's performance capabilities on Indian highways and mountain roads.
Whether you ride solo through city traffic or carry a pillion on weekend tours, choosing the right replacement tyre ensures grip, stability, and confidence through corners.
Compare compatible radial tyres below and find the best Benelli TNT 600i tyre prices for your riding style.
| Variant | Front Tyre Size | Rear Tyre Size | Load Index / Speed Rating |
|---|---|---|---|
| Benelli TNT 600i | 110/70-17 | 150/60-17 | 58W (Front) / 66W (Rear) |
| Tyre Type | Suitable For | Benefits |
|---|---|---|
| Tubeless (TL) Radial | All TNT 600i variants with alloy rims | Factory-fitted specification. Radial construction provides stable handling at highway speeds and reduces heat buildup during sustained riding. |
| Warranty Type | Duration |
|---|---|
| Manufacturing Defects | 7 years from the date of manufacture* |
| Non-Manufacturing Defects | 3 years from the date of manufacture* |
*Subject to applicable tread wear conditions and warranty terms.
The Benelli TNT 600i uses 110/70-17 tyres on the front wheel and 150/60-17 tyres on the rear wheel. Both are radial tubeless tyres with W speed rating (58W front, 73W rear) fitted to 17-inch alloy rims.
Replacement tyres for the Benelli TNT 600i typically range from Rs. 4,000 to Rs. 14,500 per tyre, depending on the brand, compound, and performance category. Pricing varies based on front versus rear fitment and the tyre's intended use.
No. The Benelli TNT 600i requires radial tyres in both the front and rear positions. The bike's suspension geometry, braking system, and performance characteristics are engineered for radial construction. Using bias-ply tyres compromises handling and safety.
For solo riding, maintain 32 PSI in the front tyre and 36 PSI in the rear tyre. When carrying a pillion, increase the front tyre pressure to 33 PSI while keeping the rear at 36 PSI. Check pressure when tyres are cold.
Tyre lifespan on the Benelli TNT 600i ranges from 25,000 to 50,000 km, depending on riding style, road conditions, and maintenance. Aggressive cornering, frequent high-speed runs, and poor road surfaces reduce lifespan. Inspect tread depth regularly.
Yes. The Benelli TNT 600i comes factory-fitted with tubeless radial tyres on both wheels. The bike's alloy rims are designed for tubeless fitment. Tubeless tyres provide better puncture resistance and allow gradual air loss rather than sudden deflation.
The W speed rating indicates the tyre is certified for sustained speeds up to 270 km/h. The front tyre has a 58W rating (250 kg load capacity), and the rear tyre has a 73W rating (365 kg load capacity). This matches the TNT 600i's performance capability.
The TNT 600i's front rim is 3.5 inches wide, and the rear is 5.5 inches wide. Deviating from the OEM 110/70-17 and 150/60-17 sizes alters handling geometry, speedometer accuracy, and ground clearance. Stick to OEM specifications for safety and performance.
Replace tyres when tread depth falls below 1.6 mm, when you notice uneven wear patterns, or when visible cracks and cuts appear on the sidewall. Even if tread depth is adequate, replace tyres older than five years from the manufacture date.
No, but matching tyre models on both wheels ensures predictable handling. If replacing only one tyre, always fit the new tyre to the rear wheel. Mismatched tyre profiles can cause instability during aggressive cornering or emergency braking on the TNT 600i.